Dive Rite O2ptima Betriebsanweisung PDF herunterladen (Seite 10)

O2ptima Manual –User Guide – Rev 1.2 Page 10 of 26

__________________________________________________________________

Proprietary Information - Not to be released without written authorization

Asseer & Associates, 5609 Power Road, Ottawa, Ontario, K1G 3N4

5. Remove the Extendair cartridge from packaging.

6. Remove the red cap from the Extendair cartridge.

7. Feed the O2 Premix rod through the center of the cartridge and secure with the

thumb nut on the far side.

8. You will have to hold the rod to prevent from spinning freely while securing the

thumb nut. Use fingers on the rod at the start and use a precision screwdriver or

allen key to provide leverage when tightning.

IMPORTANT: THE THUMB NUT AND THE BASE OF THE O2 PREMIX ROD

MUST BE TIGHLY SECURED AGAINST BOTH EDGES OF THE SCRUBBER

CARTRIDGE IN ORDER TO AVOID CO2 CHANNELING

9. Sit the canister down on the head and slide the canister body over the unit making

sure the proper grooves fit in the head. Secure the canister body by turning the

body until locked.

10. Ensure the water trap in the input cap is properly locked down. Secure the input

head to the canister body.

Thumb

Nut

O2 Premix

rod

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Keine Kommentare

Dive Rite O2ptima Betriebsanweisung Seite 10